As one of the key machines for gravity concentration, the mineral processing shaking table is widely used for the sorting of placer gold and other minerals and mainly used for the separation of gold and coal.
The gold shakingtable shaker is usually composed of three parts: the bed, the rack and the transmission device. In addition to these three parts, it also has flushing tank, feed chute, engine base and so on. The entire bed surface is supported or lifted by the rack which is equipped with slope adjusting device.
The shaking table separation is able to make the ore grains move along the different directions according to the density and particle size, at the same time, make the ore grains fan out from the starting point to the mine shafts along the diagonal. At last, the ore grain is discharged along the edge of the bed surface in turn. Due to the long ore exhausting line, the mineral processing shaking table can accurately separate a variety of products into different grades such as concentrate, time concentrate, medium concentrate, tailings and so on.
According to the purpose of separation, the mineral processing shaking table can be divided into the ore processing shaking table, slime processing shaking table and glass reinforced plastic processing shaking table. According to the model of the concentrator table, the mineral processing shaking table can be divided into the 6-S series mineral processing shaking table and LS series mineral processing shaking table.
To send inquiries, including feedback, requests for information, or questions, you may use our Feedback and Inquiries form below.