Raymond mill

The machine adopts the advanced structures of similar products from home and abroad, and gets improved on the basis of Raymond mills in the same industry. It is more efficient than ball mill, which also has the advantages of low power consumption, small floor space and one-time investment. The grinding roll presses the ring under the function of RCC tightly, so even if they are grinded to a certain extent, it would not influence the amount and fineness of finished products. The roll and the ring both have a long replacement cycle, thus the drawback of centrifugal mill is eliminated. So compared with high-speed centrifugal crusher, Raymond Mill has less dust and the workshops are much cleaner.
Features of Hongxing New Raymond Mill
According to the ultrafine equipment processing technology which our company has grasped for many years, the problems have got a comprehensive technical renovation. When using the traditional Raymond mills, we find that during processing calcite mineral, 325 mesh mineral powders contain lots of 10um ultrafine powder. If they are separated and expanded productions, benefits will get increased remarkably. Therefore, we have a lot of innovation for the structure of Raymond Mills.
Hongxing Raymond Mills are widely used in ultrafine powder processing of barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, heat insulator and other non-flammable and non-explosive materials,whose hardness is not more than 9.3 and humidity below 6%. The series of  R-type Raymond mill can be regulated within 80-325, and part of the materials can be as high as 600.
1. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably.
2. The whole plant is a vertical structure of strong systematic characteristic, so it occupies small area. It is an independent production system from crushing raw materials to grinding and packing .
3. The electric control system is centralized controlled, so it has high automaticity and does not need anyone in the operating room.

4.Main parts of the whole plant are made from cast and steel in high quality. The technics is so subtly that insures the durability of whole plant.
5.Compared with other milling plants, the machine’s passing ratio achieves 99%,while the other mill can not reach this point.
Main Structure of Raymond Mill
The machine consists of the host, analyzer, blower, cyclone separator, micro powder cyclone separator and air hose. Moreover, the host consists of rack, diffuser, shovel knife, grinding roll, grinding ring and housing.
Application:
R-type Raymond Mill is used for grinding the barite, limestone, kaolin, ceramics, and slags, etc, with the hardness below scale 9.3 of Mons and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgical industry, chemical engineering and building material for high fine powder generating and processing. The particle size of finished product can be adjusted from 80 to 325 meshes at random and the particle size of part materials can reach 2000 meshes at the maximum.
Working principles:
When using it, the materials are put into the main frame through the feed-in bin on the side cover. Then it revolves around the vertical axis line by the milling roller hanging on the star rack. Under the centrifugal force, the materials are crushed by the rolling and milling.